Плавник Hubboards 2mm Neoprene Fin Cushion Insert Kit

This Do-It-Yourself Kit offers the materials necessary to upgrade the comfort of your swimfin. Two pre-cut 2mm neoprene fin cushion inserts means you don't have to cut up an old wetsuit to harvest already worn-out neoprene. Please watch our detailed tutorial on how to properly install the Hubboards 2mm Neoprene Fin Cushion Insert Kit. The installation is high risk and very technical. Hubboards does not guarantee successful installations. Failed installations may result in loss of fins and inserts. This install video will guide you and this product has the potential to reduce fin blisters / ulcers - BUT we are not liable for any negative results you may experience. Please see complete liability release disclaimer below. 2 sizes to choose from: Medium-Small and Medium OR Medium Large, Large and XL Each Kit Features- One tube of 3oz super glue 2 pre cut 2mm soft neoprene pads Instructions ⚠️ LIABILITY DISCLAIMER & SAFETY NOTICE ⚠️ READ BEFORE USE By opening this package and using the enclosed materials, you acknowledge and agree to the following terms: User Assumes All RiskThis DIY kit is intended for competent users who accept full responsibility for correctly installing the included upgrade components. The included cyanoacrylate (super glue) is a fast-acting adhesive and must be used with caution. Misuse may result in injury, property damage, or product failure. Due to the speed and intensity of the glue, you will only have one shot at installation. Hubboards does not guarantee successful installation. No Liability for Injury or DamageHubboards shall not be liable for any injuries, damage, or losses (including but not limited to skin bonding, eye irritation, allergic reaction, or failed installations) resulting from the use or misuse of this kit and its components. Glue Handling Warnings Bonds skin and eyes in seconds — avoid contact. Use in a well-ventilated area. Keep away from children and pets. In case of skin bonding, do not forcefully pull skin apart. Soak in warm soapy water and gently separate. Seek immediate medical help if glue contacts eyes or is ingested. Intended Use OnlyThis kit is designed solely for upgrading existing Hubboards swim fins as per the provided instructions. Use of this kit voids any of the swim fin’s warranties and is undertaken at the user's own risk. Release of LiabilityBy using this kit, you agree to release, indemnify, and hold harmless Hubboards, its owners, employees, and distributors from all claims, liabilities, or expenses resulting from the use of the kit and its contents.